The floor you walk on is important, but on a boat, it’s even more critical. Out at sea, a boat is constantly moving, so having a solid, reliable surface to stand and balance on is essential. This Tabs centre-console tinnie came to us with some major flooring issues, including rotten floorboards and previous DIY repairs […]
Cruise Craft Explorer 575 Composite Hull Rebuild and Transom – Boat Rebuilds Medowie NSW
Timber-free construction is high on the wish list for many boat owners, and this Cruise Craft owner can now proudly say his boat is completely timber free. What started as a repair for a couple of rotten side pockets quickly uncovered much more extensive timber deterioration. After a thorough inspection, it became clear there was […]
Stacer Gets a New Composite Floor! Boat Floor Replacements Medowie NSW
The owner of this Stacer chose to replace his rotted plywood floor with Coosa composite panels. This approach future proofs the life of the floor with a product that won’t rot or absorb moisture. This floor was well and truly ready for replacement with bright orange mushrooms growing out of it! We also replaced the […]
Stessl Floor Replacement – Tinnie Floors Medowie NSW
Another floor replacement, this one was the full floor with much more going on, it has the raised casting deck with multiple hatches and seat bases. The old boards were all warped and twisted and were rotted in places. Because we had two floors in the same week we could run the two jobs together. […]
Haines 600R Floor Replacement – Boat Repairs Medowie NSW
We mentioned that we had two almost identical Haines 600R’s in our shop, this one needed a new floor. We were lucky enough to have the owner do most of the removal of the old floor and grinding for us so the turnaround time was cut right down. We fitted the seat pads below the […]
Two Haines 600R’s!! – Boat Repairs Nelson Bay NSW
No you’re not seeing double!! We were lucky enough to see two almost identical Haines 600R’s in our workshop together. This second very original 600R is in for a new floor. We’ll put up another post on this one soon.
Seafarer Vamp Make-Over – Boat Refurbishments Medowie NSW
Boats get used and this little Seafarer had been used without much upkeep and was due for a good working bee to catch up! The first request from the owner was to install a new casting deck in front of the center console. We made this using composite board for strength and durability and bolted […]
Formosa Project Completed – Boat Painting and Repairs Medowie NSW
This is the second installment of this large project. After the owner took it away over Christmas to fix a few cracking welds we continued on with filling and fairing the cabin sides and prepping for paint. We painted the cabin first and then the side decks. After this was the black hull sides which […]