The fiberglass back on motorhomes need maintenance and upkeep just like fiberglass boats. Gelcoat is a great product and is very durable and long lasting however it does require a level of maintenance. This motorhome came in for some damage on the back pillar where someone has backed into something. The owner asked for an […]
Motorhome Painting – RV Fiberglass Work Medowie NSW
We had this motorhome in a couple of years back because the gelcoat was leaching all over the windscreen and cab. At the time we acid washed and polished the gelcoat in the hope that it would resolve this issue however over this time it has started happening again. The owners requested us to paint […]
Slide-on Camper Repairs – RV Fiberglass Repairs Medowie NSW
If its fiberglass we can fix it! We have done plenty of work on RV vehicles, from caravans to motorhomes and campers. This camper had a few cracks showing up that needed to be repaired. The main one was near the hydraulic lifting point which folds the camper up. We improved the strength here by […]
Motor-home Roof Fiberglassed – FRP work Medowie NSW
Our work is not limited to boats, this motor-home was leaking and in need of a new roof. All the original plywood was rotted and this was stripped and replaced along with the hatches and fittings. To create run-off for the water, we ensured the new ply roof was slightly cambered which also made it […]
Slide-on Camper – Take Two!! – Quality Fiberglass Repairs Newcastle NSW
This is the second job for this Camper supplier company. Coincidentally the repair is on the same leg as the previous camper, RH front. The entire pad was distorted and needed re-laminating inside and out using epoxy. The plywood backing pad also required replacing, which was bonded in with epoxy glue. The loads on the […]
Slide-on Camper Repairs – Quality Fiberglass Repairs Newcastle
We were asked to repair this slide-on camper. There were several cosmetic repairs to be done but the main structural repair was the right-hand front leg which had damaged the fiberglass structure surrounding the top of the leg support area. Once the fractured glass was ground back it left a hole that needed to re-laminated. […]