This customer enquired about how much it would cost to repair this fiberglass shroud which was a fraction of the cost of a replacement part. Some areas required temporary propping to regain the original shape until the new glass was cured. The newly reinforced shroud was then finished in a black flowcoat.
We were approached to carry out some cosmetic repairs to this well-loved Cruisecraft. The main area was near the transom where the corner of the coaming had some damage. The other area was on the bow of the hull which was also repaired.
Now for something a little different… this boat was fitted with foam extensions to the hull. The owner fitted these as an experiment to see the effect on the hull’s performance. The result was quite amazing with extra stability underway as well as at rest. He was so impressed with the new additions to his […]
This net boat was converted to a day boat style concept by it’s owner. However the project had been sitting idle for some time and we were requested to complete the work. The boat needed the cabin top fitted and glassed, floorboards made, an extra window cut, windows fitted and inside and out to gunnel […]
We were asked to supply a quote to replace one of the keels on this catamaran. When the boat was lifted it was discovered that both keels were missing. How the keels were lost is a mystery as the owner was not aware of anything at the time. The original keels were built as a […]
This job started off with a relatively simple repair to the stern drive mounting hole however the job list soon grew. The owner requested some exhaust fittings removed and re-fitted on the transom. This involved removing the duckboard assembly for access and some re-finishing work. Also one of the engine beds needed repairs and re-flowcoating.
The owner of this inflatable tender brought this in for repairs on the rigid fiberglass hull bottom. These are built in two sections, a top and a bottom, glued along a flange. The flange joint had delaminated allowing water into ther hull. At first the idea was to simply prise the joint open and re-bond a […]
It doesn’t have to be a boat to involve fiberglass repair work. These sewerage treatment pipes were in need of repairs in high load areas. These were made in a split mould with the inside surface being smooth. The repairs were carried out using epoxy for maximum strength and durability. The customer didn’t want to have […]