This job was a hardtop for a 40ft trimaran built from foam and epoxy. A jig was made for the foam to be formed over and once secured the foam was glassed. As soon as the glass was fully cured the hardtop was turned over and the underside was glassed. Some stiffeners were required and […]
This customer had done some custom work to the back of this boat but it needed a professional touch. The work needed fairing and painting to produce a good finish. The blue super high build epoxy primer was blocked down for the final fair. The areas were painted in hardtop PU for the final high […]
This client approached us to add some custom modifications to his 20ft hull. All work was done using epoxy, plywood and E-glass reinforcement. He was considering buying an alloy engine pod and bolting to the transom however after we suggested doing the pod in composite and re-designing the entire aft end of the hull, he […]
Another transom replacement done using epoxy. This Flight Craft had a new transom fitted. As per usual all bonding, glassing or coating is done with epoxy. All through-holes are treated with epoxy resin and then epoxy primer to ensure no dry-rot can take hold again. The surface is then painted in PU colour-matched to the […]
This customer wanted to smarten up this external remote station with a new look cabinet. All the controls were cleverly hidden by a recessed door. Custom designed and fitted to suit the space and even colour matched.
The bottom of this Haines had damage from rubbing on a pebble beach overnight. Although the FRP hull wasn’t affected the gelcoat had been almost worn through in a large area. A considerable part of a job like this is to lift the boat off the trailer and put on boat stands.
A 19ft Seafarer getting a transom replacement and a custom in-built bait well incorporated into the wet well. All the work was done using epoxy for it’s super high strength and durability. The bait well was made on the bench and then fitted into the boat with all plumbing. Upon request the new transom was […]
This Bayliner had some serious collision damage on the gunnel near the bow. Once the fiberglass work was done a new aluminium extrusion was ordered from Bayliner in the US and fitted.