This job started off as a relatively simple tidy up. The brief, copper coat epoxy antifoul coating below waterline, structural repairs to Port side gunnel, replace gunnel rubber, add extra fuel tank, various gelcoat repairs, enlarge hole in wet well for steering arm, new carpet, new radio antennas and full detail. As we progressed the […]
This 7.6m Party Cat is based on the Myall Lakes and was in need of antifouling after being covered in growth. We suggested a product called Coppercoat which is a new generation epoxy antifoul coating. The process involves all 4 to 5 coats applied in the same day. The water based epoxy product is specially […]
Another update on this catamaran refit, the hardtop is structurally built with new foam/epoxy front supports and inbuilt bolt rope track for clears. All wiring has been run inside the structure for lights and solar panels. The main sheet system has been moved onto the back of the hardtop with composite support posts glassed in […]
The Arvor range of boats are well recognized with distinctive styling. The ‘trawler’ style boat is fitted with an inboard diesel and a full cabin. This boat was being fitted for a new trailer when damage occurred to the hull. On closer inspection it was found that the hull was full of water putting excessive […]
We are currently underway on this large catamaran refit. The owners of this 40ft Simpson cat are planning to live-aboard and requested some extensive modifications to have it remodeled to their liking. A few of the major changes are walk-through access into the cockpit, new aft steps, full width foam/epoxy duckboard, foam/epoxy extension of the […]
Hail damage hammered this windscreen on an older Quintrex. The trick was finding a supplier who could mould the acrylic to match the old screen. A local company did a great job of reproducing the clear acrylic. We refitted the screen with press studs and other fittings, all replaced with new stainless fasteners.
Part of our commercial fiberglass work includes jobs like this. Repairs to this ute canopy door from accidental damage causing cracking involved fiberglassing the damaged areas, filling, fairing and re-finishing in polyurethane. The inside of the door was re-flowcoated to match and the paint repairs polished in. The fiberglass work was quite detailed and intricate […]
We always appreciate hearing from our customers: “After finding out that my cruise craft had a rotten transom. I took it to Craig from Boatique Services, Craig went above and beyond to get my boat back on the water for our annual fishing trip to SWR at a very short notice. He sent me a […]